PODIUM 600 - 1 / 2 / 3 BIKE VAN STAND STEALTH BLACK
TRANSPORT YOUR BIKES IN STYLE WITH STORAGE CAPABILITY
INTERNATIONAL WIPO DESIGN COPYRIGHT IN PROGRESS
MTB / XC - EBIKES - ROAD / CX BIKES - KIDS BIKES - FAT BIKES
CHECK OUT OUR NEW UPGRADE OR RETRO FIT QUICK ADJUSTMENT SYSTEM FOR SENDER VAN STANDS!
ALL ORDERS IN STEALTH BLACK PHENOLIC - SOME IMAGES SHOW BROWN - CUSTOMISATION AVAILABLE
The SENDER PODIUM Single - Double - Triple Van Stand is part of our NEW HIGH SPECIFICATION RANGE of Van Stands designed and manufactured in the UK to transport your bike(s) in style whilst offering a storage solution so you can organise and secure your riding equipment. The PODIUM is based around the 600 Drawer Unit which can be located centrally or either side of your van. It could also be located at the rear door if using Fork Mounts.
ONE OF THE KEY / UNIQUE FEATURES IS THE ABILITY TO REMOVE THE STANDS AND PLACE THEM OUTSIDE FOR BIKE MAINTENANCE / SET UP AND CLEANING!
Our Modular design means you can start with JUST the Drawer Unit and SECURE Bike Fork / Drop Out Mounts directly to the top of our Unit (Not Included). This may be the preferred method where space between the unit and roof of the van is very limited due to fixed saddles found on XC, CX or Road Bikes. NOTE! We do NOT need to drop the saddle on our Road / CX Bikes in our (lined) Transit Custom!
THE STANDS ARE DESIGNED TO BE ROLL IN ROLL OUT! You can MICRO ADJUST THE WIDTH to get the perfect TYRE fit! You can also slide the stands on the rails to get the perfect DISTANCE BETWEEN Bikes!
If you have adequate roof clearance you can easily secure and transport one, two or three bikes secured in the STAND(s). The Stands attach QUICKLY to the Drawer Unit with a Threaded Hand Wheel. An XC or Enduro bike with a QUICK RELEASE / DROPPER Seat can EASILY fit into the stands mounted on top of the unit in most vans :) Example: We ROLL IN - ROLL OUT using a PODIUM with 2 Enduro bikes in a Long Wheel Base Transit Custom retaining one row of rear seats. We can also ROLL IN ROLL Out 3 Road / CX Bikes WITHOUT lowering the saddle.
Strapping Bikes down to the Unit is EASY if you need extra security.
Our drawers have slow closures and a catch to prevent them from opening on the move especially when fully loaded. It has 2 Internal Dividers. One divider is designed to secure your spray cans. The other is wide enough to take ridings shoes leaving the central compartment big enough for a helmet, tyres or tools.
BUILT TO LAST IN 18 mm PHENOLIC PLYWOOD - WE DO NOT COMPROMISE AND USE 12 mm or LIGHTWEIGHT VAN PLY!WE USE SPECIAL TX25 STAINLESS SCREWS FOR A TOP END FINISH!
Each side of the frame has 2 locations for securing and strapping the Unit to your van (straps not provided) The Base of the Unit AND the Stands have 4 Strong / Heavy Duty tilting Feet. These can be positioned in a variety of locations on the base OR removed so the unit sits flush with the floor. These feet are also found on the removable rails for stabilising the Stand on rough terrain when it is removed on arrival at the car park.
OUR MODULAR SYSTEM ALLOWS YOU TO CREATE MULTI LEVEL STANDS AND DRAWER UNIT COMBINATIONS!
A "bolt on" SINGLE or DOUBLE Wheel Carrier can be attached to the top of the Unit and overhangs the sides. IDEAL if you have to remove the front wheel and use Drop Out Mounts OR if you take a spare front / rear wheel on your adventures.
FUTUREPROOF! Units are MODULAR. You can increase bike transport capacity and storage by bolting on another 600 Unit to make a 1200 GRANDSTAND.
MATERIALS: No Messing! Strong and Durable 18 mm Birch Core Phenolic Plywood
ENVIRONMENTALLY FRIENDLY: Spare / Replacements Parts will be available!
IF you need help please ask. IF you have a custom requirement please ask! IF you would like CUSTOM Branding PLEASE ASK!
THE PODIUM COMES WITH SUBTLE SENDER BRANDING - SUPPLIED IN STEALTH BLACK (Images show Brown)
1) REMOVABLE POD / UNIT / SYSTEM
2) ROLL IN - ROLL OUT STANDS with OPTIONAL SECURITY STRAPPING
3) QUICK AND EASY TO REMOVE BIKE STANDS FOR BIKE TASKS / DISPLAY at EVENTS / RACES / TRAILHEAD / CARPARK
4) NO WASTED VAN SPACE WITH STORAGE SPACE
5) NO COMPROMISE PREMIUM QUALITY PRODUCT MADE FROM STRONG and DURABLE 18 mm Phenolic Plywood MANUFACTURED IN THE UK - NOT 12 mm or Lightweight Van Ply!
6) HIGH END FINISH AND LOOK
7) MODULAR and ADAPTABLE - ADD MORE PRODUCTS LATER
GUIDE TO PRODUCT SELECTION!
START WITH ONE 600mm BASE UNIT
THE PODIUM IS DESIGNED TO TAKE 2 (Two) XC or ENDURO BIKES - Adding more bikes depends on the type / size of bikes. 3 Road Bikes alternating direction is perfect. OR additionally a small kids bike is possible.
Stage 1: DECIDE IF YOU NEED 0 / 1 / 2 / 3 BIKE STANDS - RAILS INCLUDED
Stage 2: CHOOSE FLAT PACK OR ASSEMBLED - Assembled requires custom boxing and extra shipping. Reasonable DIY Skills required - Some may wish they chose Assembly!
Stage 3: DECIDE IF YOU WOULD LIKE A SINGLE / DOUBLE WHEEL HOLDER - These come in either 0 - 40 mm for Road and Gravel OR 40 to 80 mm gaps for XC and Enduro
Stage 4: GET IN TOUCH IF YOU WOULD LIKE COLOUR STANDS OR DRAWERS OR CUSTOM BRANDING! OR WE CAN DO CUSTOM COLOURS!
This product comes FLAT PACKED for SELF ASSEMBLY. You will need to drill some small holes and secure parts with screws. It will take approx 1 - 2 hrs and you will need basic power tools and DIY Skills. Most people prefer to save money however! We can assemble the product for you. Shipping Flatpack reduces the cost of shipping and chance of damage in transit associated with assembled products. The assembly price includes the time to assemble PLUS the time to custom box and extra packaging.
IMAGES ARE FOR ILLUSTRATION ONLY - COLOUR / TEXTURE MAY VARY SLIGHTLY WITHOUT NOTICE
INSTALLATION AND SECURITY:
It is important that you consider the best set up for your bikes and van before purchasing. There are infinite variations of van and internal layouts. We cannot guarantee that our product is suitable for every van. BUT our MODULAR system provides you with plenty of methods and ways you to orientate / locate and secure your bikes to the main units and then to your van. You may wish to add brackets to screw the unit to the floor. Bikes do not need additional strapping once properly rolled into the stand (depending on how you drive ;) However you can easily strap bikes to the stand. For maximum safety and security you should fix / secure the unit at multiple points to your vehicle.
SEE DRAWING IN IMAGES:
Unit Dimensions without Stands: 600 Wide x 600 Deep x 300 High
Unit Dimensions WITH Stands: 600 Wide by 720 Deep x 550 High (Top of Stand)
Unit Weight without Stands:
Unit Weight WITH TWO Stands: