Canyon bike standing behind a pair of Sender Co-Pilots  with horizontal bar mounted at limbo height
Canyon bike standing behind a pair of Sender Co-Pilots with horizontal bar mounted at bunny hop height
Side view of a pair of folded Sender Co-Pilots with bar in storage on the front
Close up view of a single Sender Co-Pilot showing use of guy lines to stabilise it
Front view of a pair of folded Sender Co-Pilots with bar in storage on the front
Front view of a Canyon bike standing behind a pair of Sender Co-Pilots

COPILOT BUNNY HOP / LIMBO STATION

Regular price £175.00
/
Tax included. Shipping calculated at checkout.

SENDER COPILOT BUNNY HOP / LIMBO STATION

Whether using a Mountain Bike, BMX or Cyclocross (Cyclo X), every rider learning, practicing and improving Jump skills MUST BUNNY HOP EFFECTIVELY! It is fundamental to gaining height and distance. It also helps with timing! If you can clear the MAX height on the COPILOT then you are probably as good as Danny MacAskill ;) - there is plenty of height to keep all riders challenged.

In addition you can use the Copilot for LIMBO type skills practices. Always good fun.

We recommend using our COPILOT with one of our Progression or Core Ramp. This will help improve pop and height gain. If you want to add extra difficulty use our Sender Cones to measure distance as well. Check out our Coaching JUMP PACKS / SET described below and found in our shop.

Simply place the COPILOT behind the take off lip of a ramp. Alter the height and distance from the lip and challenge your jumping skills. You can use the COPILOT with or without a landing ramp. A grass downslope can be good for landings.

The adjustment starts at 25 mm and ends at 1550 mm. It comes with a 3 section pipe that joins make a hurdle 1500 mm long. You have two adjustment bolts that allow mm height gain! The Copilot comes with 2 Stabilising Base Plates!

In addition it comes with 6 Guy ropes and 6 Pegs to secure the Station to grass or gravel.

The SENDER COPILOT COMES WITH:

  • 1 x Pair of STANDS with Height Adjustment
  • 1 x 3 Section UPVC Pipe with 2 x Connectors
  • 6 x Guy Ropes
  • 6 x Pegs
  • Stabilising Base Plates
  • Comes Unassembled - Assembly takes approx 30 minutes

The feet of the Stands also have 2 holes so that you can use the Pegs to secure the Stands to the ground. This method is LESS SECURE but faster than using the guy ropes if you are just out for a quick session. In this setting be careful not to pull the stands onto yourself if you connect with the pole.

Simple and Effective!

ALTERNATIVE SENDER JUMP PACKS / SETS:

  • BEGINNER JUMP PACK / SET

This includes 1 x BUNNY HOPPER / Jump Cones AND 1 x Pair of Sender Cones to measure distance!

  • ADVANCED JUMP PACK / SET

This includes 1 x COPILOT Stands AND 1 x Pair of Sender Cones and Cord to measure distance.