THE CLASSIC RANGE RAMPS ARE NO LONGER MANUFACTURED HOWEVER YOU CAN STILL EXTEND YOU EXISTING RAMPS WITH THE ORBIT AND 650 EXTENSION!
This Funky attachment is called the ORBIT because it bolts onto the 350 / 500 and 650 to create a super fast increase in Height on all these ramp sizes!
Attached to the 650 Extension it creates a take off at 800 mm off the ground!
The ORBIT bolts onto the back of:
350 to make a 500 High Ramp
500 to make a 650 High Ramp
650 to make a 800 High Ramp
The ORBIT CANNOT be used on Straight Ramps OR 200 Ramps!
The ORBIT ONLY WORKS ON CLASSIC RAMPS. It is NOT Suitable on Progression or Core Range Ramps.
Our Classic Ramp Range is Simple and Effective and Built to last from 13 Ply - Birch Plywood and 13 Ply - Birch Core Phenolic Plywood. Tried and Tested - Used and Abused.
If you are looking for excellent value for money with the bomber build quality and a compact folding design then these ramps are for you.
Peg points to reduce movement - These should be used when the Orbit is attached on the 350 and 500 Ramps!
Bolts onto other Components
Light Weight - Portable - Compact
Always wear appropriate Personal Protective Equipment (Helmet (full face) gloves, pads and a suitable maintained bike) when jumping and work up the ramps placing a smaller ramp where possible on the landing side to reduce the step down. A soft landing such as grass may reduce serious injuries.
Storage - We recommend treating your ramps before use to make them last. They can be used in the wet but should be If stored inside and left to dry. We do not recommend leaving the outside.