BUNNY HOPPER / JUMP COACHING CONES

SENDER BUNNY HOPPER / JUMP CONES

Every Rider learning, practicing and improving Jump skills MUST BUNNY HOP EFFECTIVELY! It is fundamental to gaining height and distance. It also helps with timing!

Our Bunny Hop Cones are the PERFECT Practice / Training aid to help overall bike handling skills and improve your jumping. You can use them on their own to practice your Bunny Hops OR as JUMP Cones in combination with a Rookie Progression Ramp OR a 200 / 350 Core Range Curved or Straight Ramp.

Placed behind the take off lip of a ramp the height and distance from the ramp can be altered to encourage / challenge your jumping skills.

The adjustment starts at 25 mm and ends at 425 mm. It comes with a 3 section pipe that joins make a hurdle 1500 mm long. You have two adjustment bolts that allow mm height gain! in each Jump Cone.

Once you have exceeded 425 mm in Height - Check out our COPILOT Limbo / Bunny Hop and Jump Stands! This has 25 mm to 1550 mm of height adjustment

OR IF you would like to turbo charge your jumping then consider the SENDER JUMP PACK / SETS  which comes in two sizes:

• BEGINNER JUMP PACK / SET

This includes 1 x Bunny Hop / Jump Cones AND 1 x Pair of Sender Cones to measure distance!

• ADVANCED JUMP PACK / SET

This includes 1 x COPILOT Stands AND 1 x Pair of Sender Cones to measure distance.

 The SENDER BUNNY HOPPER / JUMP CONES include:

• 1 x Pair of Cones with Height Adjustment
• 1 x 3 Section UPVC Pipe with 2 x Connectors
• Stabilising Base Plates

The feet of the Cones have 2 holes so you can use Tent Pegs (not included) to secure the Cones to the ground. The Cones also have a slot at the top and a Bottle Neck for danger tape or rope. It is also possible to use BUNGEE cord between the bolts IF the Cones are PEGGED to grass or gravel.

Simple and Effective!