2023 SENDER EXTENDER RAMPNormaler Preis £125.00
SENDER EXTENDER - ADJUSTABLE PROGRESSION 625 - 900 COMPONENT
BOLT THIS TO YOUR EXPERT PROGRESSION RAMP TO GET 24 RAMPS IN ONE! WITHOUT COMPARE - CREATE THE ULTIMATE ADVANCED JUMP RAMP!
Suitable for BMX - MOUNTAIN BIKES - SKATEBOARDS - SCOOTERS
DESIGNED FOR RIDERS AND COACHES
MARKET LEADING - UNIQUE RAMP DESIGN - STRONGER AND MORE ADJUSTABLE THAN ANY OTHER RAMPS ON THE MARKET
IMPORTANT INFORMATION: THE EXTENDER when bolted to the EXPERT PROGRESSION RAMP should not be used as a LANDING ramp extension. It is not designed to take dynamic landing loads. THE EXTENDER is also NOT a STANDALONE RAMP. It is a BOLT ON Component! It does NOT work on the CLASSIC Ramp Range. You CANNOT Bolt other SENDER features and Components to the EXTENDER!
THE EXTENDER INCREASES THE TRANSITION LENGTH OF YOUR EXPERT RAMP by 325 mm! TOTAL TAKE OFF SURFACE 1825 mm
The SENDER EXTENDER can be varied in Angle (TILTED) and then secured in STRAIGHT, CURVED and CURVED + settings.
YOU HAVE 24 RAMP SETTINGS WHEN USED ON EXPERT RAMP!
- 500 / 550 / 600 / 650 *EXTENDER > 625 / 700 / 750 / 800
- 500 / 550 / 600 / 650 *EXTENDER > 700 / 750 / 800 / 850
CURVED PLUS - DIRT JUMP MODE
- 500 / 550 / 600 / 650 *EXTENDER > 725 / 775 / 850 / 900
- EXPERT 1500 to 1825mm!
The EXTENSION is an excellent and cost effective way to make your existing ramp BIGGER!
NEVER USE THE EXPERT WITH EXTENDER AS A LANDING RAMP!
WEIGHT LIMIT: 150 kgs SWL Take OFF ONLY
SENDER SURFACE: A GRIPPY hard wearing RESIN surface for all conditions.
WEIGHT: 7 kgs
UNASSEMBLED OR ASSEMBLED: Expert Ramps and Extenders come FLAT PACKED for easy shipping and home assembly. This product will take between 30 minutes and 1 hour to assemble. You will need a Drill with 4 mm Drill Bit. 6 mm Allen Key (Found on Bike Tool) a Pozi 2 Driver Bit and TX25 Driver Bit. You can choose assembled. This option is fully built but unbolted and placed in super compact mode for shipping! NEW EASY BUILD IS NOT AVAILABLE ON THIS PRODUCT.
RAMP FOR LIFE and PRODUCT CARE - Always Store and dry your ramp inside. Treat cut edges and plywood faces with a LOW VOC Natural Coloured water based decking protector such as Ronseal. Spray and grease bolts and fixings. Spare parts are available!
USER WARNING / SAFETY: Jumping at any height is dangerous and can result in serious injury to yourself and others. ALWAYS wear a helmet, gloves and pads. Eyewear, a full face helmet and a neck brace are advisable. Always inspect your ramp for damage and secure ALL bolts before use. ALWAYS locate your ramp with good safe approach and exit. Landing on grass provides a more forgiving landing. If placed on concrete or tar ensure it does not slide. Start low, consolidate techniques and progress height with skill and confidence.
IMAGES - Please note that images are illustrative and the product may vary slightly from that advertised.