SENDER PRO HUCK

This super compact beginners jump ramp is perfect for balance bikes and first pedal bikes. Not too high - but enough to begin the process of learning to jump. It is part of our GROM Range.It folds flat for easy storage and transportation. Ideal for trips to the park or on holiday.

It is made from 100% Birch Core Phenolic Plywood making it super strong, durable and looks fantastic. 

SENDER 16 INCH CST ADAPTER

The New Standard and Pro is now suitable for Grassroots Riders.

This simple self assembled adapter allows you to fit MOST 16 inch bikes into your STANDARD or PRO. 

Once assembled it lifts the height of the wheel at the back and front to increase pedal clearance on the decks. The GAP for the tyre is 44 mm. You will need to check the rear wheel width on your bike. However by removing or adding air a good fit can be achieved.

All you need to do is strap the rear wheel in place and you can start teaching Manuals and Front Wheel Lift from an early age.

Manufactured from MDF sides and front plate with PLYWOOD internal blocks. Takes approx 20 mins to assemble.

THE SENDER WEDGE STANDARD

The Wedge is our 600 x 600 Tabletop. It fits and bolts between all of our ramps 200 - 350 - 500 and 650 High

Using the WEDGE between two ramps makes jumping safer for beginners as it removes the gap. Tricks can also be learned and attempted on the Tabletop. You can join MULTIPLE WEDGES together OR join onto our FULL SIZE Tabletop.

You can create a small 200 drop with a 200 leg set (not included)

The STANDARD Wedge is Manufactured from Birch Plywood Sides and Birch Core Phenolic Surface. 

It comes assembled or unassembled

• To Create a DROP you will need 1 x 200 Legs Set / Wedge
• To Join 2 Wedges Together you will need 1 x Joining Block Set and 2 x 200 Leg Sets

Always wear appropriate personal protective equipment when riding your bike, learning new skills or attempting tricks. A helmet and gloves is the minimum. 

NEW SENDER DICE STANDARD OR PRO

**IMAGES SHOW PRO DICE**

WHAT NUMBER WILL YOU ROLL - The FIRST 6 IN 1 PLYOMETRICs BOX. SUPER EFFECTIVE TRAINING FOR ALL AGES AND ABILITIES.

DESIGN PROTECTION APPLICATION GRANTED

AT SENDER we are always looking at ways to improve and redesign training equipment. With the DICE we have created a SINGLE box that allows the user to adjust height quickly from 300 - 400 - 500 - 600 - 700 - 800 mm HIGH.

Super Space Saving and Suitable for a huge variety of Training Exercises. If you have your own children or coach children the DICE adjusts to accommodate FIRST jumps up to significant adult standing jumps.

Along with our BALANCE BOARD and CST, the DICE forms a trio of ESSENTIAL HOME TRAINING Tools for RIDERS of ALL ABILITIES.

Made from a **FULL SHEET of 100% BIRCH PLYWOOD (Standard) OR a FULL SHEET of 100% BIRCH Core Phenolic Plywood it looks awesome, is super strong and durable and can be assembled from Flat Pack in 30 minutes.

MOST PLYO BOXES ARE MADE FROM CHEAP - INFERIOR PLYWOOD OR OSB! Sender ONLY use the BEST materials.

We can CUSTOM BRAND your DICE. Please email support@sender-ramps.com. There is a small artwork and cutting fee.

Always seek advice from a professional before undertaking personal training. Serious injury could occur if you misjudge height. Always build and work up to larger jumps. Ensure adequate fall space to avoid damaging personal property or others.

Send It - this Christmas!

Team Sender are flat out making Machines and Ramps and you may already have missed the cut off for Christmas Deliveries! No Stress!! Our Gift Cards will provide you with something unique, special and exciting to give on Christmas Day! and the festive period. Your friends, family and loved ones can sit and choose the best gift to arrive in the New Year.

Shopping for someone else but not sure what to give them? 

Choose Trailhead's, Ramps or our Trainers.

Gift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees.

For more information or help please email support@sender-ramps.com or call 07719309214 

SENDER REHAB DOMES

These special Crafted Beach Domes quickly fix onto the bottom of your Balance Board. They allow you to rock in control forwards and backwards or side to side.

NO ROLLING ACTION! 

Once they arrive at Sender HQ we then need to work them inhouse to become compatible with the board.

You can attach a single dome in the middle of the board to create controlled rotational movement OR a single dome to the left or right to create an asymetric movement.

You must seek advice from a doctor or physiotherapist before undertaking any rehab using these domes on your board!

INCLUDED:

2 x Bolts

2 x Beach Domes

SENDER LOW BEAM RAMPS

These two articulating ramps attach to the end of your BALANCE BEAM allowing you to create a LOW 130 mm High Beam. 

This provides extra progression for beginners or smaller riders.

Made from Birch Core Phenolic Plywood

Comes with:

• 2 x Ramps
• Bolts
• 2 x Plates

CAN BE USED WITH THE BEAM SWIVEL AND A SECOND BEAM.

LIMITED EDITION / STOCK!

A VERY UNIQUE CHRISTMAS PRESENT! Made in Scotland

Another Worlds first from Team Sender Ramps. Designed by ex Red Bull Athlete and mountain biker Scott Muir. Develop or Rehab - ideal!

Grip Blocs are absolutely mega for destroying the forearms and building that elusive grip strength. Developed for climbing they are every bit as relevant for training for Mountain Biking. Build your strength through this winter season and the dark months so your arms aren't screaming next season on those big descents.

You get two Grip Blocs. One for each hand. Choose a grip position which increases in 10 mm steps. Simultaneously lift a weight off the floor which is attached to the blocs by the strap provided. Hold the weight off the floor until failure and repeat either the same weight over several repetitions, or increase the weight or change the grip position. It is possible to do front raises, side raises, front holds and the most evil of exercises the wrist rotation. 

The heavier you go the more strength you develop. The lighter and longer the more stamina you build. An easy exercise watching your favourite Youtube DH or Enduro films....

You need to buy disk weights in 1 or 0.5 kg increments easy found in most super stored for minimal cost.

Just hook up and pinch like a DEMON.

Made from Birch Plywood - Beautifully hand finished and sanded smooth to be challenging to grip. Bolted together with a lifting eye. 2 strong heavy duty slings for beasts.

WEIGHTS ARE NOT INCLUDED!

WARNING: The eyebolt may periodically need tightened which is easily done with a screw driver placed through the eye and twisted.

THE SENDER SUPER FLY

PRE ORDER SPECIAL OFFER - BE THE FIRST - DELIVERY Early FEB 2020

COMING SOON: THE FLY TRAP** OUR ON THE FLY - TABLETOP - SPAN THE GAP

This bike ramp has been designed to complement all the other ramps in our range. The FLY can be used as a take off ramp or a landing ramp. It is totally UNIQUE. It is compact for easy transportation and shipping.

This ramp can be unfolded ready for jumping in 10 minutes. We recommend it is used on grass or dirt.

It can be adjusted to sit on uneven ground. You can alter the transition to be STRAIGHT - SWEET OR STEEP. 

NO MESSING ABOUT WITH ELASTIC - NO PLASTIC - Manufactured in Scotland from BOMBER combination of 18 mm Birch Plywood and 18 mm Birch Core Phenolic Plywood with Stainless Steel Hinges and Screws.

KEY FEATURES:

• A MASSIVE 2400 Long by 1200 Wide Ramp Surface!
• 600 mm HIGH to 1000 mm HIGH
• Take off OR Landing Ramp
• Create your own transition - Straight - Sweet OR Steep

APPROX FOLDED DIMENSIONS: 1200 x 600 x 175

COMES ASSEMBLED IN TWO BOXES - JUST JOIN THE TWO PARTS TOGETHER. 

Design Protection Application in Progress

Folded this ramp requires 2 people to lift safely in or out of a vehicle. Once assembled it is best moved by 4 people unless you return to flat packed size.

THE FLY IS BIG - Jumping is very serious and can go wrong very quickly. Serious injury or death could occur using this ramp. You may also break your bike or someone elses :). You must always wear appropriate PPE and jump within ability. A Full Face Helmet, Knee Pads and Gloves is the minimum required but some may require neck brace and body armour. You should always jump on grass or similar soft landing surface with plenty of free fall space all around. Our films and images show PRO's Jumping and stunts should not be replicated. 

The SENDER BEAM SWIVEL

This simple device allows you to join TWO  Balance Beams together and creare a change the angle.

• STRAIGHT FOR A LONGER BEAM
• ANGLED
• OFFSET

Compatible with LOW or HIGH BEAM

Comes with: 

Bolts / Plates / Swivel

Attaches in few minutes using 6mm Hex key from Bike Tool.

Made from Birch Core Phenolic Plywood