2021 PRO CORE SKILLS TRAINER

INTERNATIONAL WIPO DESIGN COPYRIGHT FILED AND PENDING

FULL MECHANICAL ADJUSTMENT TO FIT - No More Spacers! New Model CLAMPS rear wheel - Deck slides to fit. SENDER Built to Last - Designed for Heavy Use.

BE ONE OF THE FIRST! 

We have taken our WORLDWIDE Classic Trainer to the next level. Following on from the success of our AWARD WINNING 2020 model we have made some fantastic upgrades but retained our key features:

• 20 INCH to 29er!
• 16 INCH ADAPTER (not inc - coming soon!)
• SUPER STRONG SENDER MANUFACTURING - 18 mm BIRCH with 18 mm Phenolic Grip Surface decks.
• DESIGNED TO FLEX - WHEEL FRIENDLY
• LARGE FLAT LANDING PLATFORMS - SLIDE TO FIT TYRE WIDTH
• STABLE AND SUPPORTIVE TO GAIN CONFIDENCE
• MAKE TRAINING HARDER / MORE CHALLENGING
• MICRO ADJUSTMENT FROM 0 mm to 80 mm
• LOOP OUT STRAP
• RESISTANCE BAND ANCHOR POINTS
• FOLDING - COMPACT

COMPATIBLE:

• SENDER BIKE MAINTENANCE STAND
• SENDER BIKE STORAGE / STAND

We call out Trainer the Pro CORE SKILLSTrainer because it is much more than just a MANUAL MACHINE / TRAINER. Front wheel lift is a fundamental skill for ascending and descending trails / drop offs and jumping. Even when a rider changes bikes the geometry changes and so the need to become familiar with a new bike increases. 

Additional time on the bike working on handling skills WILL translate back to better riding on the trail. ISOLATE - PRACTICE - PROGRESS - PERFORM.

The PRO TRAINER is spot on for Riders - Coaches and Clubs. Used Worldwide by the biggest brands / shops / coaches and bikeparks. Even Suspension Specialists use our trainer to hold bikes while they a specifically tuned in the shop.

JOIN THOUSANDS OF RIDERS and IMPROVE YOUR RIDING NOW 🤘 The SENDER PRO CORE SKILLS TRAINER.

Comes FLAT PACKED for easy shipping and home installation.

SENDER BIKE / MULTI SPORT BALANCE BOARD

TRAIN LIKE A PRO WITH THE SENDER BALANCE BOARD

**ALL IMAGES SHOW PRO VERSION

*Multi-point resistance band station.
*Multi-directional and Gyrational balance board.
*Multi sport - BIKE sport specific with flat pedal positioning
*Multiple marked positions for hands and feet.
*Rehabilitation component ready - DUE TO BREXIT WE CANT GET COMPONENTS JUST NOW FOR REHAB DOMES - What a mess...

**RUBBER GRIP COVERED ROLLER!

4 ROLLER POSITIONS - 1 ROTATIONAL BALL

(Ball does not come with STANDARD VERSION)

MADE TO ORDER in 5 - 10 Working days before Shipping

OPTIONS:

CHOOSE STANDARD OR PRO VERSION in BIKE or MULTI SPORT GRAPHICS.

The only difference is the marking / indicators for feet and hands. On the Multi-sport version you will see lines for snowboard / skateboard / wakeboard etc. The pedals markings have been replaced by cross hair circles.

The benefits of using balance boards are tried and tested. Red Bull - Kate Courtney, Nino Schurter and other top athletes frequently include this form of training because of it's effectiveness. SENDER always look to improve and innovate new training and coaching equipment to improve its function and the BALANCE BOARD was screaming for an UPGRADE.

We have designed the first ever MULTI Sport - yet Bike Specific Multi Axis Training Board. Guide rails allow you to roll left and right - forward and back with security on safety stops. When training you can quickly increase difficulty by training with the ball which adds girational challenges.

Especially important and relevant for riders is the ability to practice and train with feet in the Neutral or Switch foot position using the pedal markers. We have used a standard 175 mm crankarm to locate our indicative pedal markers. 

 If you want a monster upper body blow out you can complete sets of push ups or plank using the marked hand positions whilst fighting the rollers or ball.

Increase training intensity and challenge by attaching resistance bands and completing creative exercises that offer effective workouts. Using a handlebar attached to the front of the board for a fun but brutal session.

The board has multiple resistance band attachment points making it ideal for floor workouts with greater safety. Just stand on the board which creating a secure anchor point at floor level without using the ball or rollers.

REHABILITATION AND PHYSIOTHERAPY

HOPEFULLY COMING AGAIN SOON - We have provided fixing points for HALF SPHERE Rehab Components which you will be able to BOLT to your board. These more easily controlled shapes can be mounted as a stable pair or singularly placed centrally to create wobble. The predictability and reduced movement is much more suited to recovery from injury.

NO ASSEMBLY REQUIRED

STANDARD IS MANUFACTURED from 18 mm BIRCH PLYWOOD.

PRO IS MANUFACTURED from our PRO RANGE BIRCH CORE PHENOLIC PLYWOOD for HEAVY USE and ABUSE. 

DIMENSIONS:

600 x 600 x 36 mm (Not Including the 40 mm Timber Roller)

INCLUDED:

1 x Large Wooden Roller with RUBBER GRIP COVER

1 x Wood Ball (NOT with STANDARD VERSION)

1 x Sender Balance Board

NOTE: The wooden roller is manufactured from machined timber. As with all timber they can "shake" and cracks can appear as they dry out "acclimate". This is cosmetic, normal and to be expected. The Wood is then wrapped in a Hard wearing Rubber Cover.

INTERNATIONAL DESIGN PROTECTION FILED AND IN PROGRESS

We recommend you use the board on the foam mat provided and this should be placed on carpet with plenty of clear working space in case you fall or the board travels out of control. Wear protective equipment such as a helmet and gloves as a minimum. Progress is quick, but so is the speed at which you can land up on the floor or worse. Always train carefully. Always warm up and increase the difficulty with confidence as skills improve.

Sender Balance Board for Mountain bikes - Bikes - Cycling - Skateboarding - Snowboarding - Wakeboarding - Telemarking - Skiing

The NEW 2021 SENDER FLY PRO RAMP

16 Plus! Ramps in ONE - Customize your AIR TIME!

350 High BEGINNERS to 800 High PRO

INCLUDES: THE FLY ORBIT EXTENSION 

The SENDER FLY is our Top of the Range Industry Leading Jump Ramp. After years of design and development we succeeded in creating the lightest, most adjustable, most portable / compact and robust ramp ever made.

UNIQUE DESIGN ALLOWS YOU TO CREATE A STRAIGHT RAMP OR ADJUSTABLE CURVE!

NO ELASTIC -  NO RAMP SURFACE HOLES Just super strong BOLTED - 18 mm Birch Plywood SUBSTRUCTURE with Hardwearing Grip 18 mm (Birch Core) Phenolic Resin Coated Plywood RAMP SURFACE. We have honey combed the rear face for strength and weight reduction.

MAXIMUM PROGRESSION FOR LEARNING AND COACHING

WEIGHT - The FLY is ONLY 20kgs!

LOCKOUT - at 350 / 400 / 450 / 500 / 550 / 600 STRAIGHT

ADJUST - to 400 / 450 / 500 / 550 / 600 / 650 / 750 / 800 CURVED

STABILTY - Independent leg adjustment for uneven ground making the FLY suitable for any terrain or surface.

FREERIDE MODE - Customize your take off to be Steep OR Sweet

SECURE - Use our PEG points on the front to prevent movement on grass.

SOLID - A ramp for LIFE - Construction from 18 mm Birch plywood with Phenolic GRIP Surface - Replacement parts available!

MODULAR - The FLY  is compatible with our other BOLT ON components and features ONLY in 350 STRAIGHT Mode. Attach our Tabletop - Pump Roller - Compression Roller - Seesaw Booster Kit.

CARRY - Your ramp to the park in our Custom Rucksack with Extra Strap Points!

DIMENSIONS FOLDED - Approx 600 x 240 x 360 mm

DIMENSIONS UNFOLDED  - at 350 Straight

CUSTOM BRANDING - Standout with Professional look by adding your LOGO to the ramp Surface.  

SUPERLIGHT DECKS Or PRO DECKS - Sender PRO Coaching Decks have holes for Retro fitting fixings that enable you to bolt on RUMBLE strips or SENDER ROCKS! Pro decks increase the overall weight of the ramp. SUPERLIGHT decks come as standard!

SHIPPING UK £17.50 - SHIPPING MOST OF EUROPE APPROX £20!

Worldwide Design Protection Application in Progress

RAMP FOR LIFE and PRODUCT CARE - Always Store and dry your ramp inside. Treat cut edges and plywood faces with a waterbased decking protector. Spray and grease bolts and fixings. Spare parts are available!

SAFETY NOTICE: Jumping at any height is dangerous and can result in serious injury to yourself and others. You can also destroy your bike in a crash. ALWAYS wear a helmet, gloves and pads. Eyewear, a full face hemet and a neckbrace are advisable. Always inspect your ramp for damage and secure ALL bolts before use. ALWAYS locate your ramp with good lead in and landing space and grass provides a better / more forgiving landing. If placed on concrete or tar ensure it does not slide. Start low, consolidate techniques and progress height with skill and confidence. 

IMAGES - Please note that images are illustrative and the product may vary slightly from that advertised.

SENDER PRO HUCK

This super compact beginners jump ramp is perfect for balance bikes and first pedal bikes. Not too high - but enough to begin the process of learning to jump. It is part of our GROM Range.It folds flat for easy storage and transportation. Ideal for trips to the park or on holiday.

It is made from 100% Birch Core Phenolic Plywood making it super strong, durable and looks fantastic. 

NEW 200 STANDARD CURVED

Designed and Manufactured in the Scottish Highlands

THE STANDARD 200 IS COMPATIBLE WITH OUR 200 TABLETOP and PUMP ROLLER. It is now 600 Wide and components bolt directly to the back face.

IT IS NOT COMPATIBLE WITH THE ORBIT

This range is manufactured from Birch Plywood Sides and Birch Core Phenolic Plywood Surfaces. Just as strong as the PRO Range.

Innovative, lightweight, portable and space saving ramps designed for minimum F***ing (faffing ;) around. Throw them down and be jumping in seconds. 

You can build a 200 TABLETOP or create a small drop off. We recommend using Curved Ramps with the Pump Roller. A straight ramp is excellent on the landing side of a jump.

Pair a straight ramp with a curved ramp to create Gap Jumps.

The 200 Curved (mm high) ramp stacks back to back with another 200 Ramp. Super strong design all CNC cut in our workshop in Inverness - Scotland

IF you prefer a small FOLDING ramp check out the HUCK!

This range is absolutely spot on for clubs, coaches, instructors and centres. This range has been designed to offer opportunities for isolating and working on Skills and Techniques development for all abilities across many MTB, CX and BMX scenarios.

Awesome value for money with the bomber build quality. 

• Peg points to reduce movement
• Bolts onto other Components
• Light Weight - Portable - Compact

5 - 10  Working Days Manufacture BEFORE Shipping 

Always wear appropriate Personal Protective Equipment (Helmet (full face) gloves, pads and a suitable maintained bike) when jumping and work up the ramps placing a smaller ramp where possible on the landing side to reduce the step down. A soft landing such as grass may reduce serious injuries.

Storage - All our products are designed to be stored indoors. If stored outside they should be treated accordingly with  LOW VOC Decking Protector.

SENDER 16 INCH CST ADAPTER

The New Standard and Pro is now suitable for Grassroots Riders.

THIS IS NOT SUITABLE FOR 2021 MODEL - COMING SOON!

This simple self assembled adapter allows you to fit MOST 16 inch bikes into your STANDARD or PRO. 

Once assembled it lifts the height of the wheel at the back and front to increase pedal clearance on the decks. The GAP for the tyre is 44 mm. You will need to check the rear wheel width on your bike. However by removing or adding air a good fit can be achieved.

All you need to do is strap the rear wheel in place and you can start teaching Manuals and Front Wheel Lift from an early age.

Manufactured from MDF sides and front plate with PLYWOOD internal blocks. Takes approx 20 mins to assemble.

SENDER PRO SPEED BUMP

The super cool little roller is perfect for teaching young riders to PUMP. It can also be used as a case / landing ramp from the HUCK or bigger ramps.

It is manufactured from 100% Birch Core Phenolic Plywood. Super strong and durable.

This is part of our GROM Range.

NEW SENDER DICE STANDARD OR PRO

**IMAGES SHOW PRO DICE**

WHAT NUMBER WILL YOU ROLL - The FIRST 6 IN 1 PLYOMETRICs BOX. SUPER EFFECTIVE TRAINING FOR ALL AGES AND ABILITIES.

DESIGN PROTECTION APPLICATION GRANTED

AT SENDER we are always looking at ways to improve and redesign training equipment. With the DICE we have created a SINGLE box that allows the user to adjust height quickly from 300 - 400 - 500 - 600 - 700 - 800 mm HIGH.

Super Space Saving and Suitable for a huge variety of Training Exercises. If you have your own children or coach children the DICE adjusts to accommodate FIRST jumps up to significant adult standing jumps.

Along with our BALANCE BOARD and CST, the DICE forms a trio of ESSENTIAL HOME TRAINING Tools for RIDERS of ALL ABILITIES.

Made from a **FULL SHEET of 100% BIRCH PLYWOOD (Standard) OR a FULL SHEET of 100% BIRCH Core Phenolic Plywood it looks awesome, is super strong and durable and can be assembled from Flat Pack in 30 minutes.

MOST PLYO BOXES ARE MADE FROM CHEAP - INFERIOR PLYWOOD OR OSB! Sender ONLY use the BEST materials.

We can CUSTOM BRAND your DICE. Please email support@sender-ramps.com. There is a small artwork and cutting fee.

Always seek advice from a professional before undertaking personal training. Serious injury could occur if you misjudge height. Always build and work up to larger jumps. Ensure adequate fall space to avoid damaging personal property or others.

THE SENDER NO PAIN NO GAIN PACKAGE

*Our Entire PAIN Package*

International Design Copyright Filed and Pending

Choose From:

PRO Brown Colour Birch Core Phenolic Plywood

OR

100% Natural Colour Birch Plywood

INCLUDES:

• SENDER PAIN STATION
• SENDER 20 INCH REMOTE CONTROL TURBO FAN
• SENDER ADJUSTABLE FAN SHELF
• SENDER LARGE SCREEN ADJUSTABLE TV MOUNTING BLOCK

Does not come with Rollers / Bottles / Electronic Devices / Screens / Towels / Bikes. Users should only undertake training using this station if they are fit to do so and have taken advice from a professional such as a doctor and / or coach.

THE SENDER LIMBO - HOP - HURDLE

DESIGNED SPECIFICALLY FOR CLUBS AND COACHES

Fully Adjustable - Solid OR Flexible Barriers - Limbo - Hop or Hurdle with PROGRESSION and DEVELOPMENT at all levels of ability

NOW AVAILABLE:

1. SENDER HOPHURDLE - Super portable home training
2. THE COMPETITION BARRIER

This is the ULTIMATE cross discipline MULTI FUNCTIONAL Coaching Tool.

Designed for CYCLOCROSS (CX) - CROSS COUNTRY (XC) and MOUNTAINBIKES (MTB).

It does exactly what it says on the tin. You can use it with the solid TRAINING BARRIER to create a Cyclocross Obstacle of adjustable height. Transform it into a BUNNY HOP station with a bar that is easily knocked off OR LIMBO.

The BARRIER can be FIXED in position OR leave the bolts a little loose so the barrier DESCENDS if landed on. This is an excellent feature for beginners and training sessions to reduce damage to bikes and injury to riders.

KEY FEATURES:

• FOLDING - COMPACT - EASY TO TRANSPORT AND STORE
• SET UP IN MINUTES
• ADJUSTABLE IN HEIGHT TO 1.65 m - WITH HEIGHT MARKERS - CAN BE LEVELLED ON A SLOPE 
• MULTIPLE HOLES WITH MULTIPLE FIXING HOLE DIAMETERS TO HOLD TO GROUND ANCHORS
• CAN BE USED WITH OR WITHOUT THE TRAINING BARRIER - BARRIER STARTS AT 125 mm
• CAN BE UPGRADED AND USED WITH THE COMPETITION BARRIER
• 100% BIRCH CORE PHENOLIC PLYWOOD FOR STRONG DURABLE CONSTRUCTION
• CRAFTED AND FULLY ASSEMBLED IN SCOTLAND

DOES NOT COME WITH PVC - LIMBO / BUNNY HOP PIPE due to shipping. This is easily purchased at a local electrical / hardware store for around £2.00..

IF you are an MTB / XC Club you may choose to start with just the PILLARS and NO Barrier. You can Limbo and Hurdle using a pipe.

CHOOSE FROM:

1. LIMBOHOPHURDLE PACK - With Pillars, Training Barrier and Limbo Fixings (that hold a pipe)
2. LIMBOHOPHURDLE PACK BRANDED WITH YOUR LOGO - With Pillars, Training Barrier and Limbo Fixings (that hold a pipe)
3. PILLARS ONLY With Limbo Fixings (that hold a pipe)
4. PILLARS ONLY BRANDED WITH YOUR LOGO - With Limbo Fixings
5. TRAINING BARRIER
6. TRAINING BARRIER BRANDED WITH YOUR LOGO

Users must always use appropriate protective equipment consisting on no less than helmet and gloves. Instructions must be followed to avoid serious injury to self, others and personal equipment like your bike.

Landing on the barrier in FIXED mode may seriously damage your bike and the barrier.

SENDER PAIN STATION

International Design Copyright Filed and Pending

The Ultimate Home Training Station. Super functional design. Folds for easy transport and storage. Comes as PRO Version Brown Phenolic Birch Core Plywood OR 100% Birch Plywood. Easily adjust the Work Shelf and Screen Mount!

SLEEK PROFESSIONAL DESIGN - EVERYTHING AT YOUR FINGERTIPS TO TRAIN LIKE A PRO.

Large Slot in the base for your front wheel OR Wahoo Climber. 

COMES ASSEMBLED (mount components and train)

Choose From:

PRO Brown Colour Birch Core Phenolic Plywood

OR

100% Natural Colour Birch Plywood

INCLUDES:

• Can take 40 Inch Screen!
• Large Fan Hole with Optional Fan Shelf
• Two Swing Arms with features
• Water Bottle / Mobile / Fan Remote holder / Towel holder
• Height Adjustable Laptop Shelf
• Tablet Slot with Cable Holes in Shelf
• Easy Wire Feed Holes in Column and Shelf
• Screw Points in Base to secure to floor
• Large Monitor mounting block - Easily Adjust screen height
• Folds for Easy Storage and Transportation

OPTIONAL EXTRAS:

• Adjustable Fan Shelf
• 20 Inch Remote Control Turbo Fan

Does not come with Rollers / Bottles / Electronic Devices / Screens / Towels / Bikes. Users should only undertake training using this station if they are fit to do so and have taken advice from a professional such as a doctor and / or coach.

THE SENDER SUPER FLY

PRE ORDER SPECIAL OFFER - BE THE FIRST - DELIVERY Early FEB 2020

COMING SOON: THE FLY TRAP** OUR ON THE FLY - TABLETOP - SPAN THE GAP

This bike ramp has been designed to complement all the other ramps in our range. The FLY can be used as a take off ramp or a landing ramp. It is totally UNIQUE. It is compact for easy transportation and shipping.

This ramp can be unfolded ready for jumping in 10 minutes. We recommend it is used on grass or dirt.

It can be adjusted to sit on uneven ground. You can alter the transition to be STRAIGHT - SWEET OR STEEP. 

NO MESSING ABOUT WITH ELASTIC - NO PLASTIC - Manufactured in Scotland from BOMBER combination of 18 mm Birch Plywood and 18 mm Birch Core Phenolic Plywood with Stainless Steel Hinges and Screws.

KEY FEATURES:

• A MASSIVE 2400 Long by 1200 Wide Ramp Surface!
• 600 mm HIGH to 1000 mm HIGH
• Take off OR Landing Ramp
• Create your own transition - Straight - Sweet OR Steep

APPROX FOLDED DIMENSIONS: 1200 x 600 x 175

COMES ASSEMBLED IN TWO BOXES - JUST JOIN THE TWO PARTS TOGETHER. 

Design Protection Application in Progress

Folded this ramp requires 2 people to lift safely in or out of a vehicle. Once assembled it is best moved by 4 people unless you return to flat packed size.

THE FLY IS BIG - Jumping is very serious and can go wrong very quickly. Serious injury or death could occur using this ramp. You may also break your bike or someone elses :). You must always wear appropriate PPE and jump within ability. A Full Face Helmet, Knee Pads and Gloves is the minimum required but some may require neck brace and body armour. You should always jump on grass or similar soft landing surface with plenty of free fall space all around. Our films and images show PRO's Jumping and stunts should not be replicated. 

SENDER REHAB DOMES - NOT AVALABLE JUST NOW DUE TO BREXIT

We can no longer get the Components as the Manufacturer will not ship to the UK

Hopefully this will change soon.

These special Crafted Beach Domes quickly fix onto the bottom of your Balance Board. They allow you to rock in control forwards and backwards or side to side.

NO ROLLING ACTION! 

Once they arrive at Sender HQ we then need to work them inhouse to become compatible with the board.

You can attach a single dome in the middle of the board to create controlled rotational movement OR a single dome to the left or right to create an asymetric movement.

You must seek advice from a doctor or physiotherapist before undertaking any rehab using these domes on your board!

INCLUDED:

2 x Bolts

2 x Beach Domes

SENDER FAN SHELF FOR THE PAIN STATION

This component allows you to mount OUR REMOTE CONTROL TURBO FAN (Due in Mid April) or SIT YOUR OWN FAN behind the Pain Station. The shelf tilts / moves so you can change the angle of airflow. The Pain Station is designed with a large circular ventilation hole allowing air to flow directly through onto your body while you train!

Choose From:

PRO Brown Colour Birch Core Phenolic Plywood

OR

100% Natural Colour Birch Plywood

Comes with:

• Shelf with Arms
• 4 Mounting Bolts.